2000 kVA Transformer Buyers

2000 kVA Transformer Buyers for New York Facilities

A 2000 kVA transformer is a 2 MVA unit commonly found serving substantial commercial and industrial loads. In New York, that can mean a manufacturing plant, warehouse, hospital, large apartment property or campus building. We review units released by service upgrades, facility closures, equipment replacement and changes to a site's electrical distribution.

The two forms we commonly review at this rating are padmount transformers and substation transformers. A padmount usually has enclosed cable compartments, while a substation unit may connect directly to adjacent switchgear through a throat or flange. Photos of those connections help us understand the configuration and removal work.

We also review 2000 kVA dry-type transformers, including indoor units with protective enclosures. Tell us if the nameplate lists separate ratings for different cooling arrangements; the advertised capacity needs to match the actual rating. Before offering a unit, confirm ownership: utility-owned transformers belong to the utility and cannot be sold by the property owner.

Full-load amps for a 2000 kVA transformer

Calculated as kVA × 1,000 ÷ (1.732 × V) for a three-phase unit. Check the nameplate for the actual ratings. Use the kVA to amps calculator.

Common Voltages and 2000 kVA Transformer Full Load Amps

Common primary voltages at this size include 12,470, 13,200 and 13,800 volts; some installations use 34,500 volts. A common secondary is 480Y/277 volts, although 208Y/120-volt and other configurations also appear. Substation units may have a medium-voltage secondary, such as 4,160 volts. We need the complete nameplate voltage designation, not just a description such as “480-volt transformer.”

The template's 2000 kVA transformer full load amps table shows calculated three-phase current at each listed line-to-line voltage. At 480 V, full-load current is 2405.6 A; at 4160 V, it is 277.6 A; and at 13800 V, it is 83.7 A. Our kVA-to-amps calculator explains the relationship between capacity, voltage and current.

These calculated currents describe the rated load, not measured operating current. For our review, include the winding connections, tap positions, impedance and cooling designation shown on the nameplate. Those details help establish where a used 2000 kVA transformer could fit another installation; matching kVA alone is not enough.

Weight and Oil Volume for Pickup Planning

For initial planning, an oil-filled 2000 kVA padmount or substation transformer may weigh approximately 10,000–25,000 pounds and contain approximately 400–900 gallons of insulating fluid. These are broad ranges, not specifications for your unit; check the nameplate and manufacturer documentation. Tank construction, winding material, radiators and connection compartments can move a particular transformer outside those ranges.

Send a readable photo of any total-weight, shipping-weight or fluid-volume marking. Our transformer weights by kVA guide provides planning context, but we use the unit's documented weight when coordinating lifting equipment and trucking. Tell us if accessories have been removed or if the transformer has been drained, since its current shipping condition matters.

Dry-type units have no insulating oil, and their enclosure and cooling design affect weight. For either construction, include overall dimensions and photos showing lifting points, the base and access around the unit. We do not select a forklift or crane from the kVA rating alone.

What Drives the Value of a Used 2000 kVA Transformer

We evaluate a 2000 kVA transformer for resale potential or material recovery based on its actual configuration and condition. A complete unit with usable voltages, documented condition and available test results gives us more to assess than an unidentified tank. New-in-crate equipment should include photos of the crate, shipping labels and nameplate, plus any available storage history.

The main details we review are:

• Primary and secondary voltages, winding connections and tap range.
• Manufacturer, age, cooling arrangement and impedance.
• Mineral oil, FR3/natural ester, silicone or dry-type construction.
• PCB status, fluid records and available electrical test reports.
• Leaks, bushing damage, corrosion, missing parts and the reason for removal.
• Loading access, removal requirements and transportation needs.

Our guide to what a used transformer is worth explains these factors in more detail. Failed and scrap units are still worth submitting for review, but describe the failure clearly. We distinguish a functioning transformer removed during an upgrade from one with internal electrical damage when preparing the written offer.

Send These Details to Sell a 2000 kVA Transformer

To sell a 2000 kVA transformer, start with clear nameplate photos and a few wide shots of the entire unit. Use our online offer form, or call or text 951-403-5738. Include the pickup city, your contact details and the number of units available.

Photograph the cable compartments or connection areas only when they are safely accessible. We also want to see bushings, radiators, gauges, visible leaks and any damaged or missing components. Tell us if the unit is energized, disconnected, stored outdoors, crated or already placed where a truck can reach it.

For an oil-filled transformer, send the fluid type and any PCB labeling or test records. If PCB status is unknown, say so; we need that information before settling handling arrangements. Confirm current applicable environmental requirements with the appropriate professional or agency.

Test reports are helpful if available, but you can begin the review with photos and basic details. We then review the equipment and provide a written offer with the agreed purchase and pickup terms.

How We Coordinate Pickup of a 2000 kVA Unit

We coordinate pickup throughout our New York service area, rather than asking you to deliver a heavy transformer to a public yard. We have no public storefront or drop-off yard in New York. At this size, the loading plan depends on documented weight, dimensions, lifting provisions and the route from the transformer to the truck.

Tell us about loading docks, overhead obstructions, narrow gates, indoor locations and soft ground. For a substation transformer attached to switchgear, show the connection and explain what removal work remains. Qualified personnel must disconnect and make equipment safe before handling; we coordinate pickup around that work.

We arrange the appropriate rigging, forklift or crane and flatbed, step-deck or lowboy transportation. You may load the unit with your own equipment if that is your preference and part of the agreed plan.

Our buying process includes a quick inspection at pickup to confirm that the transformer matches the photos and description. Payment is by check, ACH or wire under the agreed terms. If several units are available, send each nameplate so we can plan the group pickup accurately.